1.4404–X2CrNiMo17-12-2–AISI/SAE316L1.4404或316L奧氏體304不銹鋼AISI猶豫其鉻和鉬含磷量高，碳含磷量低，316型享有比較好的耐磨損性性。談談大半徑，高頻淬火構造約為600MPa，所以談談小載面，都可以完成螺母化來不斷提高。裝飾管有多合格證書的倉庫源頭，或者不同于的貼心服務各式或心態，使您就可不可以最好的地做到您的試行具體需求。企業的貼心服務平臺也可不可以設計或弄成一小片。大數字分類：W、 識別碼1.4404–1.4401（316）–US S31603–316L基準：ISO7153-1、ASTM F899、NF S94-090、NF EN 10088-3和-2、ASTM A479、ASTM A276、X2CrNiMo17-12-2–AFNOR Z3CND17-11-2–BS 316S31

MATERIAL SPECIFICATIONS:BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C(％): ≤0.030Si(％): ≤1.00Mn(％):≤2.00P(％)≤:0.045S(％)≤:0.030Cr(％): 16.5～18.5Ni(％): 10.0～13.0Mo(％):2.00～2.50Other(％): N≤0.11

MECHANICAL PROPERTIES( BAR/WIRE ROD ) AND INTERGRANULAR CORROSION RESISTANT TENDENCYVIASOLUTION TREATMENT

Thickness Diameter (d)/≤mm: 160Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): 40Elongation δ(transversal )≥(％): -Impact absorbing energy Akv≥/J|longitudinal: 100Impact absorbing energy Akv≥/J|transversal: -Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: YesThickness Diameter (d)/≤mm: 160<d≤250Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): -Elongation δ(transversal )≥(％): 30Impact absorbing energy Akv≥/J|longitudinal: -Impact absorbing energy Akv≥/J|transversal: 60Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: Yes一般使用用途越來越多廣泛應用有機械裝備、醫藥化工、油田、機械鐘、林果食品類和醫藥健身器械餐飲行業的好產品。這樣的材料可不可以代替大外徑或小載面的超調質(去應力退火)心態。